小金棋牌

  • 选择申克牌自动灌装机是您最佳的选择

联系方式

无锡申克自动化工程有限公司

地址:江苏无锡市新吴区江溪街道锡义路79号 
电话:0510-8211 7500
传真:0510-8529 8619 
手机:137 7157 0400(杜工),

      158 0619 1882(沈工)

邮箱:wxskzd@163.com
 





皮带秤称重仪表ICS-DT-6说明书(一)

来源:无锡申克皮带秤 日期:2017-02-21 19:58:56 点击:418 属于:行业新闻

1.概述Overview

        ICS-DT-6系列微机配料控制系统可对各种物料进行连续或断续的控制和计量,实现定量给料,以达到各种物料成份的配比,广泛适用于建材、化工、冶金、电力、粮食等行业。

Model ICS-DT-6 series of micro-computerized recipe control system is applicable to perform continuous or interrupted control and calculation for various materials, so as to actualize rationed feeding to conform recipe for various materials; and it is extensively applied in building material, chemical, metallurgy, electric power, provisions and etc industries.

ICS-DT-6 系列微机控制仪设计先进,采用高档16位单片机芯片,主要电路全CMOS化,功耗低;PID控制参数由微机自选优,无需人工设置;标定精确,无需调桥压;操作简单方便,易于掌握。微机与外围接口全部光电隔离,抗干扰能力强。控制仪备有予留通讯接口,便于构成集散控制生产控制系统(DCS)。

Model ICS-DT-6 series of micro-computerized Model ICS-DT-6 series of micro-computerized control instruments are advanced in design: high grade of 16-bit chips are used, all the main circuits are manufactured in CMOS status, with features of low power consumption and the PID control parameters are auto-selected and optimized by the microcomputer, free of any manual setting, demarcating précised, free of bridge-voltage adjustment, convenient and simple in operation and easy to grasp of. The peripheral interfaces of the microcomputer are all photoelectrically separated, which yields to strong ability in anti-disturbances. The control instrument saves communication ports to be convenient for constructing DCS production control system.

ICS-DT-6系列微机控制仪只要改变其硬件和软件,配用不同的计量机械设备和传感器,就可以构成不同的计量和控制系统,如电子皮带秤、电子绞刀秤、电子斗式秤、电子失重秤等等。

Just change its hardware and software, equip with different measurement mechanical devices and relevant transducers, the ICS-DT-6 series of micro-computerized control instrument can form different measurement and control systems, such as electronic tape weigher, electronic stripe weigher, electronic hopper weigher, electronic weight-loss weigher and etc.

小金棋牌 本文为微机控制的调速式(电磁滑差或变频调速)粉状物料用电子调速秤的使用说明书。电子调速秤由五个部份组成:

This document is the manual instructions for micro-computerized timing (electromagnetic slipper timing or frequency converter timing) powder material electronic timing weigher。 The electronic timing weigh is composed of 5 components:

l        ICS-DT-6 调速(电磁滑差/变频)控制型微机控制仪;

ICS-DT-6 timing (electromagnetic slipper timing / frequency converter timing) controlled micro-computerized control instrument

l        (电磁滑差/变频)调速式给料机;

(Electromagnetic slipper timing / frequency converter timing) timing feeder;

l        高精度密封型负荷传感器;High precision sealed load transducer;

l        控制柜及强电部分(可控硅/变频控制器)。

Control chest and power supply part (Controllable silicone/FC controller)。


强电部分安装在控制柜下部,低压电器选用引进国际标准产品,质量可靠;配置强电联锁开关、电机断相过流保护,整体性好。

The power supply part is installed in the lower art of the control chest, and the low voltage appliances are using products with international standards, reliable in quality; this part is equi8pped with power interlock, motor phase-loss protection, and so, is good in a integral way.

2. 主要技术参数和功能 Main technical parameters and functions

2.1.  主要技术参数: Main technical parameters

2.1.1  正常工作环境条件:    Normal environmental working conditions

环境温度Ambient temperature:    0~40℃

  相对湿度RH:    不大于No larger than 90%

  大气压力Atmospheric pressure:    86~108 kPa

2.1.2  小金棋牌供电电源Power supply:

  Item

     Voltage

Frequency

  

Power Consumption

控制仪Controller

单相  Single Phase AC 220±10V

50Hz

小于25 VA

<25 VA

调速秤Timing Weigher

三相  3P-AC 380±10V

50Hz

≤3KVA(具体见标牌Confer name-print for detail

 

2.1.3             精度Precision:    

微机控制仪计量及控制精度:优于0.1%

Measurement & Control precision of the micro-computerized control instrument: Better than 0。1

系统动态计量误差:≤1%F.S.

System dynamic measurement tolerance≤1%F。S。

系统定量控制误差:≤1%F.S.

System tolerance for ration control≤1%F.S.

2.2.  功能简介Introduction to functions:

l        具有手动与自动运行功能。Functions with manual and auto modes for operation.

l        PID 调速方式控制参数由微机自动整定,无需人工调试设置。

The microcomputer shall automatically demarcate PID control parameters for timing mode, free of manual setting and regulating。

l        标定操作简单直观,直接数字式修正标定参数,桥压固定稳压。

The operation of demarcation is simple and direct, digital amendment directly, bridge voltage is fixed and stable。

l        断电后可靠保存全部数据(不需外接电池)。

Power-off data protection (no outer cells needed).

l        具有与PLC联网的控制接囗,可方便地组成DCS系统另外还


l        留有予留串行通讯接口(RS-485),可方便地与上位机相连,构成集散控制系统,或与其他计算机联网。

 

Equipped with PLC interface for networking, which is convenient for constructing of DCS system, furthermore, it saves serial communication port RS-485, which makes convenient connection to the up-stream facilities to construct DCS  control system

l        留有微型打印机接囗,打印产量记录(如班产)。

Pre-saved with micro-print dock for printing production record (such as shift production).

l        具有故障声光报警自动停机、电机断相过流保护功能、强电联锁功能。With functions of light-sound alarm for failure and simultaneous auto stop, motor protection for over-current from phase-loss, power interlock and etc.

l        电磁滑差采用16位计数器直接数字移相可控硅,可靠性高。变频调速方式采用12位计数器DAC 模拟量输出至变频器,精度高。两者仅改变设备配置及软件,使用方法不变。

The electromagnetic slipper uses  16-digit counter for direct digital phase shifting controllable silicone, highly reliable. It uses 12-digit counter DAC for outputting analog signal to frequency converter for the FC timing mode, which is high in precision. The two methods just alter the configuration and software while keep unchanged the using method.

 

3.系统工作原理Principle for system working

小金棋牌 自动控制时,微机按需要的流量值,控制调速秤转速;同时,微机定时采集负荷传感器给出的调速秤中物料重量信号及速度信号,进行放大处理;经过高精度的A/D转换,送入微处理器进行运算,得到物料的实际流量和累计产量。微处理器将实时流量值与给定流量值相比较,进行偏差调节,实现闭环自动控制;微机控制调速秤的电机转速,使实时流量值随时趋近于设定流量值,达到定量给料,并实现累计产量自动补偿。

When in auto mode, the microcomputer shall control the speed of weigher timing according to the needed runoff; at the same time, the microcomputer shall periodically collect signals of weight and speed sent out by the load transducer from timing weigher for amplification; and after high precision A/D alternation, the altered signals are sent into the microprocessor for calculation to get the actual runoff and accumulated production of relevant materials。 The microprocessor shall compare the value of realtime runoff and the value of set runoff, and perform deflection amendment, so as to accomplish close-ring automatic control; the microcomputer controls the motor rate of the timing weigher, so as to make realtime runoff approach the set runoff, and to shoot the target of rationed feeding and actualizing automatic compensation for production accumulation。

手动控制时,微处理器仅对调速秤的速度信号实现闭环控制,使实时速度值更趋近于设定速度值,达到定速给料。定速控制可以适应某些场合应用的需要(如标定)。

When performing manual control, the microprocessor just actualizes close-ring control for the speed signal from timing weigher, so as to let realtime speed approach more closely the value of set speed and hence to shoot the target of rationed feeding。 The rationed speed control is applicable to the need of some certain application (such as demarcation)。

4.  结构特征Characteristics of the Structure

l        控制仪采用铝合金与不锈钢机箱,轻触式薄膜面板,全封闭,防尘效果好。

The control instrument uses aluminum alloy and stainless steel cases, light-touching film panel, fully enclosed, good for dust proof.

l        主要电路板采用双重接触方式、防振机构,可靠性高且方便维护。

The main PCB is in duplicated contact mode together with shockproof device, which feature good in reliability and easy for maintenance.

l        控制仪安装在12²上架式机柜之中;机柜下部为强电安装接线部分,整体性好。

The instrument is mounted inner12”shelves of a chest; the lower part of the chest is for power wiring, good of integrity。

小金棋牌 l        机箱尺寸 Chest dimensions

体积Cubage: 宽×高×深;W×G×D: 160×80×170(mm)

小金棋牌 开孔尺寸Hole size:高×宽为H×W:150×75 (mm)

小金棋牌 (未完,待续)

小金棋牌APP 秒速时时彩计划 秒速时时彩平台 秒速时时彩 秒速时时彩 青海快3开奖结果 极速3D彩票开奖 秒速时时彩计划 秒速时时彩平台 秒速时时彩